|Warranty:||One Year||Brand Name:||Kolida|
trimble gnss receiver,
dual frequency gnss receiver
Novel For Demanding Survey Environment Field Work Kolida K5 Plus GPS RTK
|Signal Tracking||BDS B1, B2, B3,|
|GPS L1C/A, L1C, L2C, L2E, L5|
|GLONASS L1C/A, L1P, L2C/A,L2P, L3|
|SBAS L1C/A, L5( Just for the satellites supporting L5 )|
|Galileo GIOVE-A, GIOVE-B, E1, E5A, E5B|
|QZSS,WAAS, MSAS, EGNOS, GAGAN, SBAS|
|GNSS Feature||Positioning output rate: 1HZ~50HZ|
|Initialization time : <10s|
|Initialization reliability: >99.99%|
|Code Differential GNSS Positioning||Horizontal: 0.25 m + 1 ppm RMS|
|Vertical: 0.50 m + 1 ppm RMS|
|SBAS positioning accuracy: typically<5m 3DRMS|
|Static GNSS Surveying||Horizontal: 2.5 mm + 0.5 ppm RMS|
|Vertical: 5 mm + 0.5 ppm RMS|
|Real-Time Kinematic Surveying (Baseline<30km)||Horizontal: 8 mm + 1 ppm RMS|
|Vertical: 15 mm + 1 ppm RMS|
|Horizontal: 8 mm + 0.5 ppm RMS|
|Network RTK||Vertical: 15 mm + 0.5 ppm RMS|
|RTK initialization time: 2~8s|
|Dimension||13.4cm × 11.8cm|
|Weigh||1.02Kg(includiing installed battery)|
|Material||Magnesium aluminum alloy shell|
|Waterproof/Dustproof||IP67 standard,protected from long time immersion to depth of 1m|
|IP67 standard,fully protected against blowing dust|
|Shock and Vibration||Not operating: Withstand 2 meters pole drop onto the cement ground naturally|
|operating : Withstand 40G 10milliseconds sawtooth wave impact test|
|Battery||Rechargeable,removeable Lithium-ion battery|
|Battery Life||Single battery: 7h (static mode)|
|5h (internal UHF base mode)|
|6h (rover mode)|
|Communications and Data Storage|
|I/O Port||5PIN LEMO external power port+RS232|
|7PIN LEMO RS232 + USB|
|1 network/radio data link antenna port|
|SIM card slot|
|Wireless Modem||Integrated internal radio receiver and transmitter 0.5W/2W|
|External radio transmitter 5W/25W|
|Communications Protocol||Trim Talk450s,TrimMark3,PCC EOT,KOLIDA|
|Cellular Moblie Network||WCDMA3.5G network communication module,GPRS/EDGE compatible,|
|Double Module Bluetooth||BLEBluetooth 4.0 standard,support for android,ios cellphone connection|
|Bluetooth 2.1 + EDR standard|
|NFC Communication (Optional)||Realizing close range (shorter than 10cm)automatic pair between K5 PLUS and controller|
|(controller equipped NFC wireless communication module needed)|
|Data storage/Transmission||4GB internal storage, more than 3 year raw observation data (1.4M/day)|
|base on recording from 14 satelites Plug and play more of USB data transmission|
|Data Format||Differential data format: CMR+,CMR×,RTCM 2.1,RTCM 2.3,RTCM 3.0, RTCM3.1,RTCM3.2|
|GPS output data format: NMEA0183,PJK plane coordinates,binery code|
|Network model support: VRS,FKP,MAC,supporting NTRIP protocol|
|Inertial Sensing System(Optional)|
Built-in tilt compensator, correcting coordinates automaticlly according to the tilt direction and angle of the centering rod
|Electornic Bubble||Conteroller software display electronic bubble, checking leveling status of the centering rod real time|
|Buttons||One-button operation, Visual operation, convenient and efficient|
We can use the different international express company, usually, our first choice is DHL. if you have specified requirement , please inform us before the order.
your inquiry will be replied within 24 hours, we welcome your email and call at any time.
our products are original and 100% new. and they will be carefully checked before we ship them out.
we provide one year quality warranty, within one year since you bought the products from us, you will get our technology support.
Shanghai Galxy International Trade company, Ltd. combining with developing, researching and producing. Our company is located in Pudong Developing Zone, and has two subsidiary companies: Shanghai Galaxy International Trade Co., Ltd. and Mato Opto-electrical High-tech Company. Our company has researching center and factory in Changzhou.
Our main products are as following: total station, electronic theodolite, automatic level, laser level, rotation laser, GPS, distance laser sensor and accessories, such as tripod, prism, pole, staff and USB cable for total station. Our company designs software for many domestic and oversea factories, for example, Boif, TJOP, Stanley, and Cst-Berger. We have powerful capacity in technical research, and the products we designed have advanced technology and steady performance. The non-prism total station and the absolute coding measure instrument we developed and produced have very competitive points in the measure instrument market.
We expect that we could cooperate with more business partners from all over the world. In addition, we can do OEM service for companies or dealers that want to find better producers in China.
Our goal is to produce the best surveying instruments in the world.
Our target is to globalize the market, internationalize the quality and maximize the profit!