trimble gnss receiver,
dual frequency gnss receiver
|GNSS Configuration||Satellite signals tracked simultaneously||Channels:336|
|BeiDou: B1, B2, B3|
|GPS: L1C/A, L2C, L2E, L5|
|GLONASS: L1C/A, L2C/A, L3 CDMA|
|GALILEO: E1, E5A, E5B, E5AltBOC, E6|
|SBAS: L1C/A, L5|
|QZSS, WAAS, MSAS, GAGAN, IRNSS|
|Support the PPP service|
|Output format||ASCII: NMEA-0183, binary data|
|Positioning output frequency||Maximum 50Hz|
|Static data format||GNS and Rinex|
|Message type||CMR, RTCM2.X, RTCM3.0, RTCM3.2|
|Network model||VRS, FKP, MAC; support NTRIP|
|System Configuration||Operating system||Cortex-A5 core, Linux|
|Data storage||Circulating 16GB internal storage; records GNS and RINEX formats simultaneously|
|Accuracy and Reliability|
|Horizontal: 8mm +1ppm RMS|
|Vertical: 15m +1ppm RMS|
|Static||Horizontal: 2.5mm +0.5ppm RMS|
|Vertical: 5m + 0.5ppm RMS|
|Connector||External connector||5-pin socket, USB socket, antenna port and SIM card slot|
|Communication||Cellular mobile||Internal 4G mobile network:TDD-LTE, FDD-LTE, WCDMA, EDGE, GPRS, GSM|
|WiFi||802.11 b/g access point and client mode, WiFi hotspot available|
|Bluetooth||Bluetooth® 4.0/2.1+EDR, 2.4GHz|
|Internal UHF transceiver radio||Transmitting power: 0.1W-1W adjustable|
|Protocol: HI-TARGET, TRIMTALK450S, TRIMMARK, TRANSEOT|
|Bands: 116 bands(16 bands are configurable)|
|Working Range: Typically 3-5 km ,optimal 5-8 km|
|Transmitting power: 5W/25W adjustable|
|Working voltage: 9-16V|
|Working Range: Typically 8-10 km ,optimal 15-20 km|
|Sensor||Electronic bubble||Intelligent levelling|
|Tilt survey||Tilt correction system will continue to monitor the inclination of the centering rod, and compensate to correct the coordinates|
|Temperature sensor||Intelligent temperature control|
|User Interface||Button||Single button|
|Touch screen||Industrial OLED color screen (240 * 240); Capacitive touch, waterproof, supports glove operation|
|LED Lamp||Satellite lamp, signal lamp, power light|
|Application Function||Advanced function||OTG, NFC, WebUI, USB firmware upgrade, battery quick charge|
|Intelligence application||Intelligent voice, self-test function, network repeater station, radio repeater station|
|Remote service||Message delivery, remote upgrade|
|Physical||Internal battery||6800mAh lithium-ion rechargeable and remove battery, RTK rover(UHF/Cellular)≥9 hours|
|External power||6-28V DC external power input(5-pin port) with over-discharge protection|
|Power consumption||4.4W(static mode)|
|Materials||The shell is made of magnesium alloy material|
|Free fall||Designed to survive a 2m natural fall onto concrete|
With stronger ihand30 controller:
IHand30 hand-held controller is a professional data collector, based on the Android system. Using a combination of physical buttons and touch screen to operate, the default input languages are Chinese and English, and it supports multiple languages. The industrial-standard design can withstand 1.2 meters drop to a cement floor, is IP67 waterproof and dustproof standard to adapt to a complex operating environment. At the same time, the super capacity lithium battery can handle all weather requirements.
The iHand30 hand-held controller configs 3.7 inches 640 * 480 highlighted LCD; 1.5GHZ, quad-core 64-bit CPU; and 16GB ROM +2 GB RAM memory. It has a built-in Micro SD card slot, and maximum support 128GB expansion card (it only supports FAT32 format SD card, the NTFS format SD card can not be supported); dual card dual stand-by, and supports the entire 4G network. With the Android 6.0 operating system, the interface is optimized and easy to use.
1. Industrial-standard design, with IP67 it can withstand a 1.2 meters drop to a cement floor and adapt to a complex operating environment.
2. Highlighted LCD, the LCD screen is normally readable under strong sunlight.
3. Supports Bluetooth, Wi-Fi and 4G,which is convenient to carry out a variety of wireless data transmissions with the receiver. Wi-Fi and 4G can be used at the same time. Refer to the Hi-Survey Road Software User's Guide for more details.
4. Internal 8 million pixel camera: for field collection of image information.
5. Internal removable large capacity lithium battery for more than 15 hours of work.
6. Internal NFC chip, supports NFC data transmission for a rapid connection between the RTK and hand-held controller.
7. Fast charge technology: for a rapid battery charge.
8. Full keyboard input method.
9. Local online upgrade to facilitate quick changes.