Color: | Yellow | Purpose: | Measuring |
---|---|---|---|
Weight: | 1.2kg | ||
High Light: | bluetooth rtk gps receiver,trimble gnss receiver |
Specification:
Configuration | Detailed indicators | |
GNSS Configuration | Satellite signals tracked simultaneously | Channels:336 |
BeiDou: B1, B2, B3 | ||
GPS: L1C/A, L2C, L2E, L5 | ||
GLONASS: L1C/A, L2C/A, L3 CDMA | ||
GALILEO: E1, E5A, E5B, E5AltBOC, E6 | ||
SBAS: L1C/A, L5 | ||
QZSS, WAAS, MSAS, GAGAN, IRNSS | ||
Support the PPP service | ||
Output format | ASCII: NMEA-0183, binary data | |
Positioning output frequency | Maximum 50Hz | |
Static data format | GNS and Rinex | |
Message type | CMR, RTCM2.X, RTCM3.0, RTCM3.2 | |
Network model | VRS, FKP, MAC; support NTRIP | |
System Configuration | Operating system | Cortex-A5 core, Linux |
Data storage | Circulating 16GB internal storage; records GNS and RINEX formats simultaneously | |
Accuracy and Reliability[1] | RTK | Horizontal: 8mm +1ppm RMS |
Vertical: 15m +1ppm RMS | ||
Static | Horizontal: 2.5mm +0.5ppm RMS | |
Vertical: 5m + 0.5ppm RMS | ||
Initialization time | <10s | |
Initialization reliability | >99.99% | |
Connector | External connector | 5-pin socket, USB socket, antenna port and SIM card slot |
Communication | Cellular mobile | Internal 4G mobile network:TDD-LTE, FDD-LTE, WCDMA, EDGE, GPRS, GSM |
WiFi | 802.11 b/g access point and client mode, WiFi hotspot available | |
Bluetooth | Bluetooth® 4.0/2.1+EDR, 2.4GHz | |
Internal UHF transceiver radio | Transmitting power: 0.1W-1W adjustable | |
Frequency: 403MHz-473MHz | ||
Protocol: HI-TARGET, TRIMTALK450S, TRIMMARK, TRANSEOT | ||
Bands: 116 bands(16 bands are configurable) | ||
Working Range: Typically 3-5 km ,optimal 5-8 km | ||
External | Transmitting power: 5W/25W adjustable | |
Working voltage: 9-16V | ||
Frequency: 410MHz-470MHz | ||
Working Range: Typically 8-10 km ,optimal 15-20 km | ||
Sensor | Electronic bubble | Intelligent levelling |
Tilt survey[2] | Tilt correction system will continue to monitor the inclination of the centering rod, and compensate to correct the coordinates | |
Temperature sensor | Intelligent temperature control | |
User Interface | Button | Single button |
Touch screen | Industrial OLED color screen (240 * 240); Capacitive touch, waterproof, supports glove operation | |
LED Lamp | Satellite lamp, signal lamp, power light | |
Application Function | Advanced function | OTG, NFC, WebUI, USB firmware upgrade, battery quick charge |
Intelligence application | Intelligent voice, self-test function, network repeater station, radio repeater station | |
Remote service | Message delivery, remote upgrade | |
Physical | Internal battery | 6800mAh lithium-ion rechargeable and remove battery, RTK rover(UHF/Cellular)≥9 hours[3] |
External power | 6-28V DC external power input(5-pin port) with over-discharge protection | |
Dimensions | Φ158mm×98mm | |
Weight | ≤1.2kg(includes battery) | |
Power consumption | 4.4W(static mode) | |
Materials | The shell is made of magnesium alloy material | |
Environment | Water/dustproof | IP67 |
Free fall | Designed to survive a 2m natural fall onto concrete | |
Humidity | 100%, condensing | |
Operation temperature | -40ºC~+75ºC | |
Storage temperature | -55ºC~+85ºC | |
Note: |
With stronger ihand30 controller:
IHand30 hand-held controller is a professional data collector, based on the Android system. Using a combination of physical buttons and touch screen to operate, the default input languages are Chinese and English, and it supports multiple languages. The industrial-standard design can withstand 1.2 meters drop to a cement floor, is IP67 waterproof and dustproof standard to adapt to a complex operating environment. At the same time, the super capacity lithium battery can handle all weather requirements.
The iHand30 hand-held controller configs 3.7 inches 640 * 480 highlighted LCD; 1.5GHZ, quad-core 64-bit CPU; and 16GB ROM +2 GB RAM memory. It has a built-in Micro SD card slot, and maximum support 128GB expansion card (it only supports FAT32 format SD card, the NTFS format SD card can not be supported); dual card dual stand-by, and supports the entire 4G network. With the Android 6.0 operating system, the interface is optimized and easy to use.
Key Features:
1. Industrial-standard design, with IP67 it can withstand a 1.2 meters drop to a cement floor and adapt to a complex operating environment.
2. Highlighted LCD, the LCD screen is normally readable under strong sunlight.
3. Supports Bluetooth, Wi-Fi and 4G,which is convenient to carry out a variety of wireless data transmissions with the receiver. Wi-Fi and 4G can be used at the same time. Refer to the Hi-Survey Road Software User's Guide for more details.
4. Internal 8 million pixel camera: for field collection of image information.
5. Internal removable large capacity lithium battery for more than 15 hours of work.
6. Internal NFC chip, supports NFC data transmission for a rapid connection between the RTK and hand-held controller.
7. Fast charge technology: for a rapid battery charge.
8. Full keyboard input method.
9. Local online upgrade to facilitate quick changes.