bluetooth rtk gps receiver,
trimble gnss receiver
Hi-target V98 with the new high quality GNSS receiver of Hi-Target, benefiting from the next-generation GNSS engine, supporting the PPP service. It has full band support for cellular mobile networks (LTE, WCDMA, EDGE,GPRS,GSM), and supports most of the radio protocols on an internal UHF transceiver radio.
Has an innovative designs, a magnesium alloy structure and the Linux 3.2.0 operating system. The HD OLED color touch screen has a better display, and operates in rain. iRTK5 is an industry-leading GNSS RTK surveying solution.
|GNSS Configuration||Satellite signals tracked simultaneously||Channels:336|
|BeiDou: B1, B2, B3|
|GPS: L1C/A, L2C, L2E, L5|
|GLONASS: L1C/A, L2C/A, L3 CDMA|
|GALILEO: E1, E5A, E5B, E5AltBOC, E6|
|SBAS: L1C/A, L5|
|QZSS, WAAS, MSAS, GAGAN, IRNSS|
|Support the PPP service|
|Output format||ASCII: NMEA-0183, binary data|
|Positioning output frequency||Maximum 50Hz|
|Static data format||GNS and Rinex|
|Message type||CMR, RTCM2.X, RTCM3.0, RTCM3.2|
|Network model||VRS, FKP, MAC; support NTRIP|
|System Configuration||Operating system||Cortex-A5 core, Linux|
|Data storage||Circulating 16GB internal storage; records GNS and RINEX formats simultaneously|
|Accuracy and Reliability|
|Horizontal: 8mm +1ppm RMS|
|Vertical: 15m +1ppm RMS|
|Static||Horizontal: 2.5mm +0.5ppm RMS|
|Vertical: 5m + 0.5ppm RMS|
|Connector||External connector||5-pin socket, USB socket, antenna port and SIM card slot|
|Communication||Cellular mobile||Internal 4G mobile network:TDD-LTE, FDD-LTE, WCDMA, EDGE, GPRS, GSM|
|WiFi||802.11 b/g access point and client mode, WiFi hotspot available|
|Bluetooth||Bluetooth® 4.0/2.1+EDR, 2.4GHz|
|Internal UHF transceiver radio||Transmitting power: 0.1W-1W adjustable|
|Protocol: HI-TARGET, TRIMTALK450S, TRIMMARK, TRANSEOT|
|Bands: 116 bands(16 bands are configurable)|
|Working Range: Typically 3-5 km ,optimal 5-8 km|
|Transmitting power: 5W/25W adjustable|
|Working voltage: 9-16V|
|Working Range: Typically 8-10 km ,optimal 15-20 km|
|Sensor||Electronic bubble||Intelligent levelling|
|Tilt survey||Tilt correction system will continue to monitor the inclination of the centering rod, and compensate to correct the coordinates|
|Temperature sensor||Intelligent temperature control|
|User Interface||Button||Single button|
|Touch screen||Industrial OLED color screen (240 * 240); Capacitive touch, waterproof, supports glove operation|
|LED Lamp||Satellite lamp, signal lamp, power light|
|Application Function||Advanced function||OTG, NFC, WebUI, USB firmware upgrade, battery quick charge|
|Intelligence application||Intelligent voice, self-test function, network repeater station, radio repeater station|
|Remote service||Message delivery, remote upgrade|
|Physical||Internal battery||6800mAh lithium-ion rechargeable and remove battery, RTK rover(UHF/Cellular)≥9 hours|
|External power||6-28V DC external power input(5-pin port) with over-discharge protection|
|Power consumption||4.4W(static mode)|
|Materials||The shell is made of magnesium alloy material|
|Free fall||Designed to survive a 2m natural fall onto concrete|
With stronger ihand30 controller:
IHand30 hand-held controller is a professional data collector, based on the Android system. Using a combination of physical buttons and touch screen to operate, the default input languages are Chinese and English, and it supports multiple languages. The industrial-standard design can withstand 1.2 meters drop to a cement floor, is IP67 waterproof and dustproof standard to adapt to a complex operating environment. At the same time, the super capacity lithium battery can handle all weather requirements.
The iHand30 hand-held controller configs 3.7 inches 640 * 480 highlighted LCD; 1.5GHZ, quad-core 64-bit CPU; and 16GB ROM +2 GB RAM memory. It has a built-in Micro SD card slot, and maximum support 128GB expansion card (it only supports FAT32 format SD card, the NTFS format SD card can not be supported); dual card dual stand-by, and supports the entire 4G network. With the Android 6.0 operating system, the interface is optimized and easy to use.
1. Industrial-standard design, with IP67 it can withstand a 1.2 meters drop to a cement floor and adapt to a complex operating environment.
2. Highlighted LCD, the LCD screen is normally readable under strong sunlight.
3. Supports Bluetooth, Wi-Fi and 4G,which is convenient to carry out a variety of wireless data transmissions with the receiver. Wi-Fi and 4G can be used at the same time. Refer to the Hi-Survey Road Software User's Guide for more details.
4. Internal 8 million pixel camera: for field collection of image information.
5. Internal removable large capacity lithium battery for more than 15 hours of work.
6. Internal NFC chip, supports NFC data transmission for a rapid connection between the RTK and hand-held controller.
7. Fast charge technology: for a rapid battery charge.
8. Full keyboard input method.
9. Local online upgrade to facilitate quick changes.